#Keysight 82357b Pc
9.1) and from its menu run Agilent IO Monitor and Agilent Interactive IO on your PC - set blank character in EOL Sequence (Agilent Interactive IO -> Options) (i.e. 10 kOhm) - plug USB cable from GPIB adapter in the PC USB - run the Agilent Connection Expert (I have ver. The 82357B is fit for exchange rates more than 1.15 MB/s with vast square exchanges. This link is protected and indicated to 1,500 additions, guaranteeing a tough association and solid information exchange. I tried it and here is the method which provide me successful: - DMM and GPIB adapter physicaly connected - connect a resistor at the DMM 2 wire input (e.g. The 82357B USB/GPIB Interface utilizes a thin, adaptable, superb USB link that is USB 1.1 and 2.0 compatible. I asked Signal32 for a help (I had not any experience with GPIB) and he advised me to plug in & out the 82357B adapter. I had the same problem but I was not succesfull. The screenshot below shows the 3458A and 3457A connected. I tried turning off auto-device recognition via the "*IDN?" command but that did not help. Any idea what could be the issue ? I'm assuming there are some configuration options for the USB adapter that I have to set in order to get it to work with older HP gear, but I can't seem to be able to find them. The instruments do get detected by the adapter, and I can see them and they show up with the correct address. Non-read commands such as "DCV", "DCI", "ACV" work as expected. When I try to send a command that returns data (such as ID?) the read times out. The problem that I am having is that I can't read any data from the 3458A and 3457A.
#Keysight 82357b software
I would like to mention that all functions work with a 34401A, so it's likely not a defective 82357B USB adapter / corrupt software install. The USB cable is shielded, and the connector is specified to 1,500 insertions, ensuring a durable connection and reliable data transfer.Hello, I'm trying to use a 3458A and 3457A via GPIB with the latest version of Keysight Instrument Control and a genuine 82357B USB adapter. The 82357B USB/GPIB interface uses a thin, flexible, high-quality USB cable that is USB 2.0-compliant.
The 82357B USB/GPIB interface implements USB 1.1 (12 Mbits/s) and is compatible with USB 2.0. No external power supplies are necessary. It is also hot-pluggable, making it easy to connect and disconnect without having to shut down the computer. There are no switches to set, no PC cards to install, and no external power supplies required. The Keysight 82357B USB/GPIB Interface provides a direct connection from a USB port on your laptop or desktop PC to GPIB instruments.
#Keysight 82357b drivers
#Keysight 82357b portable
Portable Process and Pressure Instruments.